Erinomaiset AUDEZE LCD-2 magnetoplanaarikuulokkeet kohtuullisella hinnalla ja näyttävillä puurungoilla. Nyt uusin Fazor malli!
Alla vasemmalla bambu ja oikealla ruusupuu versiot. Valitse omasi valikosta!
Bamboo Caribbean Rosewood
Super Suede mallit, alcantara tyynyt sekä panta
(valittavissa molemmille puulaaduille, hinta sama kuin nahkatyynyin)
Huom! Erikoistilaustuote - ei palautusoikeutta, paitsi takuukorjaustapauksissa palautus korjausta/korvausta varten.
The LCD2 is the state of the art Planar Magnetic Headphone from Audez’e Inc. Every component of the LCD2 is precision engineered with one goal in mind: Recreate the sound exactly like the artist intended. LCD2 combines leading edge technology and development with knowledge, feedback and suggestions from an on-going dialogue with Sound Engineers and Audiophiles. The Audeze LCD2 uses a proprietary thin film diaphragm that is housed between a unique super efficient push-pull magnetic structure. Audezes' manufacturing process combined with the advanced materials and technology produce extremely accurate and incredible sounding headphones. The LCD2s are made of environmentally sustainable bamboo. The sloped earpads are made of premium lambskin leather with specially selected foam to offer the right amount of firmness.LCD2 is also available with leather free option. The leather free headphones use specially selected faux suede material that matches the performance of the regular LCD2.
• Planar Magnetic Transducers. • Custom designed Bamboo or Caribbean Rosewood earcups.
• Specially designed premium lamb skin leather earpads.
• Diaphragm excursion of 2.5 mm p-p for very high SPL. Maximum output exceeds 130 dB.
• Left and rear transducers have matched sensitivity and frequency response within +/- 0.5 dB.
• Specially designed self closing, acoustically transparent magnetic structure with highest grade Neodymium magnets.
• Large diaphragm area creates plane sound waves that enter ear canals the same way as it happens in real environment.
• Frequency Response: 5 Hz - 20 KHz, usable high frequency extension 50 KHz.
• Distortion: less than 1% even at full output.
• Impedance: 60 Ohms, nominal
• Maximum diaphragm excursion: 2.5mm p-p
• Efficiency: 91 dB/1mW
• Maximum output: 133dB, 15W
• Transducer active diaphragm area: 6.17 square inches.
LCD2 comes with
ADZ-6 Cable (2.5 meters or 8.2 ft with split)
Wood Care kit
Travel Case for storage
Frequency response graph of the particular LCD2
Care kit and Warranty documents
3 year limited warranty (see warranty document for details).
- Travel Case
- Balanced Cable (1x4 pin)
- Balanced Cable (2x3 pin)
- Single Ended Cable (ADZ-6)
- Wood Care kit
- Leather Care kit
“The best headphones I've measured, and not by a small margin” and “my new favorite headphones, not for their measurements but for their sound.”
- Tyll Hertensens, Founder Headroom
“The Audeze LCD2 is a game changer”
- Steve Guttenberg, CNET.com The Audiophiliac, November 2010
“If you are in the music business I think this is the perfect reference headphone”
- Michael Lockwood, Guitarist, Producer and Songwriter
“Hail the new king!” Audez’e LCD2 is the first headphone to walk away with the prestegious Blue Moon Awards.
- Srajan Ebaen, 6moons.com
“Working as sound designer and engineer on feature film, don't know what I would do without the LCD2s!”
- Ryan Origin, Electronic Music Producer / Recodring Engineer
Although speakers have been developed with a number of different technologies, the traditional cone speaker still dominates the commercial market. The Planar Transducers are fundamentally different from conventional cone speakers or dynamic drivers. Planar Magnetic speakers use a flat, lightweight diaphragm suspended in a magnetic field as the driver rather than a cone attached to a voice coil. The diaphragm has a circuit pattern etched into it that, when energized, creates the forces that drive the diaphragm to move in the magnetic field to produce sound. Planar magnetic speakers, when implemented well, have inherent advantages over cone speakers. First, the driver moves in a more piston-like manner due to the even application of force by the magnetic field surrounding the diaphragm, which reduces distortion effects. Second, the diaphragm is mounted on all sides, reducing fatigue points; Planar Magnetic speakers employ a tough polymer as the base material, which makes it much more durable than cone diaphragms. Third, because the diaphragm is very thin, it is also more responsive, leading to more faithful sound reproduction and the crispness of sound that is the hallmark of good quality speakers. And finally, because it is flat, planar magnetic drivers can dissipate heat more quickly using the large surface area of the diaphragm itself, which dramatically reduces the chance of burn-out.
Audez’e employs a number of proprietary techniques to improve upon the basic planar magnetic design. Audez’e design uses a very thin, proprietary film for the diaphragm. Once etched, the diaphragm is mounted in tension between two layers of opposing magnets. This mounting process requires great precision, and Audez’e has designed proprietary methods and tools to effect a very consistent and even mount. This diaphragm manufacturing process has been tuned to ensure a flat frequency response over a wide bandwidth while ensuring a robust diaphragm and maximum efficiency of the driver.
Low Distortion, High Performance.
To achieve high sensitivity, very low distortion and excellent sound quality, the Audez’e transducers incorporate very strong magnetic structure. Twelve very strong Neodymium magnets are used in each transducer (24 per headphone) to create a very strong Magnetic field. The magnetic field density is very linear between rows of magnets and along the magnetic gap as well. This creates a linear force that moves the diaphragm back and forth with extremely low distortion. The strong magnetic field also results in extremely fast transient response. The mass of the diaphragm is very light and is comparable to the mass of the air it moves during the operation.
Accuracy and Testing
Precision is the hall mark of all Audez’e products. Audez’e drivers are one of the most accurate in the current market and this has been confirmed by independent tests. All our manufacturing and assembly processess have been designed with accuracy in mind. The transducers are tested every step of the production process to enforce very strict quality control process. Various test and measurements record each step of the production process. The Audez’e drivers are almost like clones because of the manufacturing consistency. Measured frequency response during regular quality control testing shows incredibly narrow spread of curves variations (with less the +/- 0.5dB). If one overlays hundreds of curves on top of each other all those graphs, the result is quite impressive compared to conventional drivers and our competitors.