Etusivu Yhteydenotto Oma asiakastili Musiikin.com kotisivuille
Tuoteryhmät
Valmistajat
Tietosivut
Maksutavat

Tuotteen tiedot

Audioengine D3 24-bit DAC/kuulokevahvistin USB liitännästä

229.00€
Maksa osissa alk. 9.90€/kk »
Toimitusaika

Määrä:
kpl

Kysy lisää tuotteesta



Korkealaatuinen USB liitännästä ottava 24bit DAC + kuulokevahvistin

 

d3

d3audeze

 

 

Kuuntele super-laadulla suoraan tietokoneeltasi koneen äänikortti ohittaen.

Volyymin säätö voidaan säätää suoraan tietokoneelta.  DAC kuitenkin käsittelee sen korkeatasoisesti digitaalisesti ohjattuna analogisena volyymin säätönä.

Takuu 2 vuotta. 

 

 

Audioengine D3 Premium 24-bit DAC


- Connect D3 to a USB port on your Mac or PC and send high-quality music to your headphones or any audio system.
- D3 includes a USB DAC and headphone amplifier for incredible audio performance in a portable design.
- Audioengine D3 is the perfect intro to computer audio!

The Audioengine D3 Premium 24-bit DAC (digital-to-analog converter) allows you to bypass your computer's headphone output and send music directly through a USB port for noticeably improved fidelity and a higher output. The D3 is a powerful yet portable converter with performance and features usually found in more expensive DACs and is the perfect interface between your computer and headphones or any music system.

Easy setup

Setup is easy and no special software is needed, making D3 a true plug-and-play solution. The D3 plugs directly into a USB port on your computer so no external power supply or cables are needed. The output of the D3 connects to headphones, Audioengine powered speakers, or any audio system. The D3 also has a sample rate indicator that shows sample rates above 48K so you'll know you’re getting the most out of your HD music.

Versatile

The quality of most computer headphone outputs isn't generally very inspiring, so the D3 provides a better option by streaming audio from your computer's USB port and directly connecting to your music system or headphones. The D3 DAC is the perfect way to get great-sounding music not only from your computer to headphones but also from your computer to any music system.

Designed for the headphone enthusiast

D3 will process digital audio at any bit depth up to 24 bits and any native sample rate to 96KHz. With its high signal-to-noise ratio and low distortion, the D3 delivers sound quality generally heard only in more expensive DACs. The high-performance headphone amplifier was designed for a wide range of headphones and will satisfy even the most demanding headphone enthusiast with its high output and revealing sound. The D3's asynchronous data transfer carefully controls USB streaming audio from any computer which greatly improves audio performance.

See and hear the difference

The aluminum case of the D3 reflects traditional Audioengine design and the high-quality components and audio fidelity are typical of Audioengine's commitment to great sound at affordable prices. The Audioengine D3 continues to close the gap between your computer music and home hi-fi and even if you're not an audio enthusiast we guarantee your music will sound better!

 

Features

Portable USB audio converter for Mac or PC
Stream bit-perfect native 24/96 HD audio
High-performance headphone amp included
Plug-and-play, no drivers or software to install
Connect headphones or any music system
Easily drives low impedance headphones
Computer OS volume control
Asynchronous data transfer with dual master clocks
HD indicator for sample rates above 48K
Metal injection molded (MIM) aluminum case

Works with

Any computer, Mac or PC
Headphones
Powered speakers
Any music system with audio inputs (RCA or minijack)

What’s in the box

D3 DAC
Carry case
1/4” headphone adapter cable
Setup guide
Product line brochure

 

Full-scale output

2.0V RMS

Frequency response

10Hz-25kHz (+/- 0.5dB)

SNR

(DC to 20kHz) >110dB

THD+N

(1kHz FS 96 kS/s) <0.002%

Crosstalk

-110dB

USB transfer mode

Asynchronous (dual clock)

USB device class

Type 1.1 or above

Input

USB Audio

Input bit depth

24 bit (upsampled)

Input sample rate

32kHz-96kHz - native playback
188.2kHz, 192kHz - re-sampled to 96kHz for playback

Output

Analog audio minijack

Output impedance

10 ohms

Suggested headphone impedance

12 ohms to 10K ohms

Headphone amplifier

LME49726

D/A converter

AKM4396

USB controller

TI1020B

Power requirement

USB 5V DC, 200mA

USB power filtering

2-stage redundant regulation

Product dimensions

6.5 x 2 x 1 cm (including USB connector)

Shipping weight

1.0lbs (0.5kg)

Environmental

Operating Temperature: 32 to 95 degrees F
Non-operating Temp: -4 to 113 degrees F
Relative Humidity: 5% to 95% non-condensing

Included accessories

1/8" to 1/4” adapter cable
Product case
Setup guide

D3 Internal Converter

The heart of the D3 is the AK4396 DAC, well regarded for its low noise and high fidelity. Due to the high signal-to-noise specs of the AK4396 and the added benefit of double redundancy power source conversion and filtering, the D3 presents impressive low noise and low distortion characteristics. The D3 can process digital audio at any bit depth up to 24 bits and any sample rate up to 192kHz. D3 pads (upsamples) all bit depths internally to 24 bits, thus achieving a higher signal-to-noise ratio.

D3 Headphone Amplifier

The D3 contains a high-performance headphone amplifier based on the LME49726 low-noise opamp. This amp is able to provide low-impedance, high-fidelity audio and a 2-volt output which easily drives a wide range of headphones, including headphones with impedances as low as 12 ohms. The D3’s relay-controlled stereo outputs can also be connected to any system with an analog audio input, such as Audioengine powered speakers, for example.

D3 Power

The D3 is powered directly from the USB bus and power is passed through two stages of regulation to ensure no USB bus power variations affect the audio quality. This low-noise, low-ripple power supply is located on a separate circuit board for extra isolation and thermal management.

D3 Volume Control

Volume is controlled from the computer’s OS and is implemented in the D3 as a digitally-controlled analog volume control.

 

 d3wtexts

 

audioenginelogo 

 

 

 

 

 

Tutustu myös seuraaviin tuotteisiin
Kudos SUPER 20 lattiakaiuttimet
Kudos SUPER 20 lattiakaiuttimet
MÄNTY kuvapaneelit
MÄNTY kuvapaneelit
KRK VXT seinäteline VXT tai VXT6/8
KRK VXT seinäteline VXT tai VXT6/8
Linn Brakit seinäkiinnike kaiuttimelle
Linn Brakit seinäkiinnike kaiuttimelle
Linn Sneaky DSM verkkosoitin/vahvistin-HDMI
Linn Sneaky DSM verkkosoitin/vahvistin-HDMI
Ostoskori
0 kpl
Tuotehaku
Anna tuotehaun hakusana
 
Laajennettu haku
Tarjoukset
DUAL CS 505-4 levysoitin hyvällä äänirasialla, 1 v. käytetty DUAL CS 505-4 levysoitin hyvällä äänirasialla, 1 v. käytetty
599.00€  1,265.00€
Levysoitin-vahvistin-kauittimet Levysoitin-vahvistin-kauittimet
1,699.00€  1,855.00€
Marten Heritage DUKE 2 jalustakaiuttimet + jalustat, vähän käytetyt Marten Heritage DUKE 2 jalustakaiuttimet + jalustat, vähän käytetyt
5,600.00€  8,500.00€
Syysmyrskyssä: TANNOY Revolution R3 lattiakaiuttimet, kirsikka, käytetyt Syysmyrskyssä: TANNOY Revolution R3 lattiakaiuttimet, kirsikka, käytetyt
295.00€  1,250.00€
Linn Akurate 225 center, käytetty, vaahtera SUPER PRICE! Linn Akurate 225 center, käytetty, vaahtera SUPER PRICE!
999.00€  4,262.00€
Linn MAJIK 2100 Dynamik stereo päätevahvistin, hopea, käytetty Linn MAJIK 2100 Dynamik stereo päätevahvistin, hopea, käytetty
1,095.00€  2,294.00€
Syysmyrskyssä: Quadraspire "kuningas" -AV/Hifi -taso QAVX, käytetty Syysmyrskyssä: Quadraspire "kuningas" -AV/Hifi -taso QAVX, käytetty
799.00€  2,640.00€
Linn KINOS High-end esivahvistin/DAC, käytetty Linn KINOS High-end esivahvistin/DAC, käytetty
950.00€  8,950.00€
Linn MAJIK 4100 Dynamik 4-kanavainen päätevahvistin, hopea, käytetty Linn MAJIK 4100 Dynamik 4-kanavainen päätevahvistin, hopea, käytetty
1,590.00€  3,212.00€